Measure once, cut correctly
Hydraulic hose assembly length calculator
Convert between finished overall length and hose cut length using the fitting allowances confirmed for your hose-and-fitting system.
Enter the measured values
Use one unit throughout. The result is also shown in the other unit.
Hose cut length
890 mm
35.0394 in
1000 − 55 − 55 = 890 mm
Allowance definition
For each end, enter the distance from the hose cut end to the measurement point used for the finished assembly length. Get this value from the verified crimp specification for the exact fitting and hose combination.
Do not guess fitting allowances
Fitting insertion depth and the finished-length measurement point vary by manufacturer, series, size, angle, and crimp specification. Confirm both end allowances and clocking before cutting or crimping.