Individual hose record

KLA10210 Hose Repair Specifications

Excavator · Case · CX160E LC · Swivel Joint

Finished length1,800 mm

Repair specifications

Part number: KLA10210
Installation route: Swivel joint → travel motorOriginal Chinese: 回转接头~行走马达
Hose specification: DN19;4SP-12;35MPa
Finished length: 1,800 mm
Working pressure: 35 MPa
Left fitting: British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥
Right fitting: 45° elbow, British female thread, 60° external cone seatOriginal Chinese: 45°英制内螺纹60°外锥
Quantity: 4

Same system

Related Hoses

Hose record

KAJ3241

Installation route: Swivel joint → travel motorOriginal Chinese: 回转接头~行走马达

Length: 2,750 mm
Specification: DN6;1SN-04;22.5MPa
Left fitting: British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥
Right fitting: British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥

View full repair specifications

Hose record

KHJ1144

Installation route: Swivel joint → travel motorOriginal Chinese: 回转接头~行走马达

Length: 1,800 mm
Specification: DN13;1SN-08;16MPa
Left fitting: British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥
Right fitting: British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥

View full repair specifications

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode

See the exact question being sent

I am checking hydraulic hose repair information for "KLA10210 Hose Repair Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_3c7a985d4dc51e6767e80624/
HoseSeek currently shows: part number: KLA10210; installation route: Swivel joint → travel motor; hose specification: DN19;4SP-12;35MPa; finished length in millimetres: 1800; left fitting: British female thread, 60° external cone seat; right fitting: 45° elbow, British female thread, 60° external cone seat.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.