- Length
- 750 mm
- Cut length
- 681 mm
- Specification
- X461LT-6
- Left fitting
- X13W46-8-6
- Right fitting
- X16846-8-6
Hose assembly specifications
F072512 Hydraulic Hose Specifications
Forestry Machine · John Deere · 1210G Forwarder
Total length800 mm
Hose drawing
Hose assembly drawing
Check the total length and both fitting codes before fabrication.
Repair measurements
These text values can be translated and copied. Confirm them against the machine before fabrication.
- Machine
- John Deere 1210G Forwarder
- Part number
- F072512
- Hose type
- X461LT-12
- Total length
- 800 mm
- Cut length
- 705 mm
- Left-end hydraulic fitting code
- X10646-12-12Look up this code
- Right-end hydraulic fitting code
- X11946-12-12Look up this code
- Manual reference
- PC13525, page 2
Hose assembly details
- Part number
- F072512
- Hose type
- X461LT-12
- Total length
- 800 mm
- Cut length
- 705 mm
- Left fitting code
- X10646-12-12
- Right fitting code
- X11946-12-12
- Application
- 1210G Forwarder: Stage V, Rotating and Leveling Cabin Gen II, Grey
- Manual page
- 2
Same machine
More hoses for this machine
- Length
- 3,250 mm
- Cut length
- 3,166 mm
- Specification
- X487TC-12
- Left fitting
- X10646-12-12
- Right fitting
- X10646-12-12
- Length
- 1,350 mm
- Cut length
- 1,281 mm
- Specification
- X461LT-6
- Left fitting
- X13W46-8-6
- Right fitting
- X16846-8-6
- Length
- 485 mm
- Cut length
- 430 mm
- Specification
- X787TC-8
- Left fitting
- X10677-8-8
- Right fitting
- X10677-8-8
- Length
- 1,250 mm
- Cut length
- 1,200 mm
- Specification
- XH31-4
- Left fitting
- XKC9VS-8-4
- Right fitting
- XKC9VS-8-4
- Length
- 1,200 mm
- Cut length
- 1,134 mm
- Specification
- XH31-4
- Left fitting
- XK06VS-6-4
- Right fitting
- XK06VS-6-4
- Length
- 410 mm
- Cut length
- 315 mm
- Specification
- X461LT-12
- Left fitting
- X13946-12-12
- Right fitting
- X10646-12-12
- Length
- 3,450 mm
- Cut length
- 3,392 mm
- Specification
- X461LT-6
- Left fitting
- X13946-6-6
- Right fitting
- X10646-6-6
Optional cross-check
Ask an AI search tool to check this repair data
The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.
See the exact question being sent
I am checking hydraulic hose repair information for "F072512 Hydraulic Hose Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_5a9432302e0263deb30f9c89/ HoseSeek currently shows: part number: F072512; hose specification: X461LT-12; finished length in millimetres: 800; left fitting: X10646-12-12; right fitting: X11946-12-12. Verify, where applicable: 1. Exact machine model and any serial-number range. 2. Hydraulic system and installation route. 3. Hose part number and diagram pipe number. 4. Finished length, hose specification, and pressure rating. 5. Both end fittings, including thread, sealing seat, size, and angle. 6. Installation-diagram position and routing. State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
For reference only. Confirm the actual hose before fabrication.