- Length
- 2,000 mm
- Specification
- DN6;-4;10.3Mpa
- Left fitting
- 90°美制内螺纹37°锥
- Right fitting
- 美制内螺纹37°锥
Hydraulic line repair data
Caterpillar CAT®315-A Swing Motor Hose List
Coverage details
- Hoses
- 5 records
- Full specifications
- 5 records
- Systems
- 1 systems
- Length range
- 609–2,300 mm
Current system
Find a hose in this system
Use the number on the diagram, a part number, connection point, length, hose size, or fitting.
Hose repair details
Hose Length and Fitting List
- Length
- 2,000 mm
- Specification
- DN6;-4;10.3Mpa
- Left fitting
- 90°美制内螺纹37°锥
- Right fitting
- 美制内螺纹37°锥
- Length
- 860 mm
- Specification
- DN19;1SN-12;8.7Mpa
- Left fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Right fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
- Length
- 609 mm
- Specification
- DN19;1SN-12;8.7Mpa
- Left fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
- Right fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
- Length
- 2,300 mm
- Specification
- DN6;-4;10.3Mpa
- Left fitting
- 美制内螺纹37°锥
- Right fitting
- 美制内螺纹37°锥
No hose in this list matches those words. Clear the box or search another machine.
Workshop guide
Finding the correct hydraulic hose for Caterpillar CAT®315-A Swing Motor
Start with the machine and route
For Caterpillar CAT®315-A Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 111-67252,000 mm · DN6;-4;10.3Mpa · 回转马达~手动阀(液压泵右)
- 111-67252,000 mm · DN6;-4;10.3Mpa · 回转马达~蓄能器电磁阀(液压油箱后)
- 119-2652860 mm · DN19;1SN-12;8.7Mpa · 回转马达~回油阀块(分配阀左)
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Based on current published data
Common Repair Questions
Questions appear only when a published record or linked PDF page provides the answer.
How many hoses are currently listed for Caterpillar CAT®315-A Swing Motor?
What is the hose length range for Caterpillar CAT®315-A Swing Motor?
Which hose specifications are common for Caterpillar CAT®315-A Swing Motor?
How can I identify the left and right hose fittings for Caterpillar CAT®315-A Swing Motor?
Each record keeps the left and right fitting descriptions separate. Current examples: 111-6725: left 90°美制内螺纹37°锥; right 美制内螺纹37°锥; 111-6725: left 90°美制内螺纹37°锥; right 美制内螺纹37°锥; 119-2652: left American female thread, flat-face seal; right 90° elbow, American female thread, flat-face seal. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.
Can I locate a Caterpillar CAT®315-A Swing Motor hose by diagram pipe number?
Yes. Current examples with a diagram pipe number are: Pipe No. 78 (111-6725), Pipe No. 72 (111-6725), Pipe No. 1 (119-2652), Pipe No. 1 (107-1475). Open a record to compare its installation position with the linked manual page.