Hydraulic line repair data

Caterpillar CAT®323D LN Hose Parts Reference

Manufacturer parts data

Official Cat hose references

Use the part number, finished length, and hose size to identify a likely replacement.

Cat part number

087-6583

Finished length
2,530 mm
Hose inside diameter
0.375 in
Hose type
Thermoplastic Reduced Outside Diameter Hose
Service class
Medium pressure
Open Cat part page

Cat part number

187-5676

Finished length
950 mm
Hose inside diameter
0.500 in
Hose type
Pilot Hose
Service class
Pilot line
Open Cat part page

Cat part number

210-9966

Finished length
1,500 mm
Hose inside diameter
0.500 in
Hose type
4 or 6 Wire Spiral
Service class
High pressure
Open Cat part page

Cat does not publish both end-fitting details on these pages. Match the part number and confirm both fittings on the removed hose before fabrication.

Manufacturer reference paths

Related machines sharing hose part numbers

These machines share one or more published hose part numbers with the current model.

CAT®320D3 shared part numbersCAT®323D3 shared part numbersCAT®323D L3 shared part numbersCAT®323D S3 shared part numbersCAT®323D SA3 shared part numbersCAT®324D L3 shared part numbersCAT®325D L3 shared part numbersCAT®326D23 shared part numbersCAT®326D2 L3 shared part numbersCAT®329D L3 shared part numbersCAT®329D23 shared part numbersCAT®329D2 L3 shared part numbers

Workshop guide

Finding the correct hydraulic hose for Caterpillar CAT®323D LN

Start with the machine and route

For Caterpillar CAT®323D LN, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Manufacturer references to compare

  • 087-65832,530 mm · 0.38 in ID · Thermoplastic Reduced Outside Diameter Hose
  • 187-5676950 mm · 0.5 in ID · Pilot Hose
  • 210-99661,500 mm · 0.5 in ID · 4 or 6 Wire Spiral

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

Which manufacturer hose part numbers are listed for Caterpillar CAT®323D LN?

The manufacturer reference currently lists 3 hose part numbers, including 087-6583, 187-5676, 210-9966. Use the exact part number as the first lookup key.

What finished hose lengths are published for Caterpillar CAT®323D LN?

The published manufacturer references range from 950–2,530 mm. Match the length to the exact part number and machine before ordering or fabrication.

Do the manufacturer references include both end fittings for Caterpillar CAT®323D LN?

No. These reference rows provide part number, finished length, hose inside diameter, and hose type or service class where published. Confirm both end fittings on the removed hose or an applicable parts drawing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "Caterpillar CAT®323D LN Hose Parts Reference". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/machines/caterpillar/cat-174-323d-ln--43415426233137343b33323344204c4e/

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
Scroll to Top