Length: 1,100 mm
Specification: DN25;4SP-16;35Mpa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 3

4357695

Installation route: 大臂(前段)~大臂(后段)

Length: 1,480 mm
Specification: DN25;4SP-16;35Mpa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 53

4330114

Installation route: 控制阀(破碎器)~电磁阀(破碎器)

Length: 3,100 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 7

4369740

Installation route: 流速切换阀~过渡阀块(流速切换)

Length: 800 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 43

4382552

Installation route: 流速切换阀~先导滤芯

Length: 3,350 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 26

4375516

Installation route: 分配阀下~控制阀(破碎器)

Length: 1,700 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 36A

4275675

Installation route: 大臂(破碎器)~铁管(破碎器)

Length: 1,100 mm
Specification: DN25;4SH-16;34.5Mpa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 24

4389994

Installation route: 大臂臂侧铁管~小臂臂侧铁管

Length: 1,500 mm
Specification: DN10;2SN-6;34.5MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 12

4368896

Installation route: 流速切换阀~过渡阀块(流速切换)

Length: 700 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 7

4159514

Installation route: 先导泵~控制阀(破碎器)

Length: 650 mm
Specification: DN12;2SN-8;20.5MPa
Left fitting: 英制内螺纹30°外锥
Right fitting: 英制内螺纹30°外锥

View full repair specifications

Diagram Pipe No. 7

9161968

Installation route: 破碎器踏板~进回油阀

Length: 1,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 17

4376566

Installation route: 破碎器踏板~电磁阀(破碎器)

Length: 4,900 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 18

4369735

Installation route: 中转接头~流速切换阀

Length: 1,500 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

4375564

Installation route: 破碎器踏板~进回油阀

Length: 1,150 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 25

4375560

Installation route: 分配阀上~控制阀(破碎器)

Length: 1,850 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 19

4369736

Installation route: 中转接头~过渡阀块(流速切换)

Length: 1,900 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 13

4369951

Installation route: 电磁阀(破碎器)~过渡阀块(破碎器)

Length: 700 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 13

4369734

Installation route: 分配阀上~过渡阀块(流速切换)

Length: 1,700 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 36

4368884

Installation route: 前流速切换阀~后流速切换阀

Length: 450 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 44

9164884

Installation route: 控制阀(破碎器)~回油铁管(分配阀)

Length: 2,350 mm
Specification: DN19;1SN-12;7MPa
Left fitting: 英制内螺纹30°外锥
Right fitting: 90°英制内螺纹30°外锥

View full repair specifications

Diagram Pipe No. 6

9161967

Installation route: 破碎器踏板~进回油阀

Length: 1,180 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 34

4368891

Installation route: 液压油箱~流速切换阀

Length: 1,950 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 7

4375563

Installation route: 破碎器踏板~进回油阀

Length: 1,000 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 7A

4368704

Installation route: 破碎器踏板~进回油阀

Length: 1,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 18

4364795

Installation route: 破碎器踏板~过渡阀块(踏板)

Length: 420 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 44A

4392104

Installation route: 控制阀(破碎器)~回油铁管(分配阀)

Length: 2,350 mm
Specification: DN19;1SN-12;7MPa
Left fitting: 英制内螺纹30°外锥
Right fitting: 90°英制内螺纹30°外锥

View full repair specifications

Diagram Pipe No. 40

9156248

Installation route: 大臂(破碎器)~分配阀左

Length: 1,450 mm
Specification: DN25;4SH-16;34.5Mpa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 90° light-series flangeOriginal Chinese: 90°法兰-轻型

View full repair specifications

Diagram Pipe No. 10

4208454

Installation route: 大臂(后段)~卸压安全阀(破碎器)

Length: 460 mm
Specification: DN19;4SP-12;38Mpa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 6

4369733

Installation route: 过渡阀块(破碎器)~过渡阀块(流速切换)

Length: 500 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 6

4368928

Installation route: 过渡阀块(流速切换)~过渡阀块(破碎器踏板)

Length: 3,100 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 36

4368095

Installation route: 大臂(破碎器)~控制阀(破碎器)

Length: 2,300 mm
Specification: DN10;2SN-6;34.5MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 45°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 14

4369952

Installation route: 电磁阀(破碎器)~过渡阀块(破碎器)

Length: 900 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi EX200LC-5 Attachments – Breaker?

There are 14 published records. 14 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi EX200LC-5 Attachments – Breaker?

Based on published records with valid lengths, the range is 310–3,350 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi EX200LC-5 Attachments – Breaker?

The most frequent raw specifications in the current published records are: DN10;1SN-6;7Mpa (9 records), DN25;4SP-16;35Mpa (2 records), DN10;2SN-6;34.5MPa (1 records), DN12;2SN-8;20.5MPa (1 records), DN25;4SH-16;34.5Mpa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi EX200LC-5 Attachments – Breaker?

Each record keeps the left and right fitting descriptions separate. Current examples: 4372796: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4369741: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4369953: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi EX200LC-5 Attachments – Breaker hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 19 (4372796), Pipe No. 26 (4369741), Pipe No. 15 (4369953), Pipe No. 6A (4368703). Open a record to compare its installation position with the linked manual page.