For Hitachi ZX130-5G Attachments, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Hitachi ZX130-5G systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

AT71082711 mm · DN10;2SN-06;17.5Mpa · 电磁阀~液压压力阀
AT71082711 mm · DN10;2SN-06;17.5Mpa · 电动比例阀~液压压力阀
AT781243,531 mm · DN10;2SN-06;17.5Mpa · 进回油阀~电动比例阀

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX130-5G Attachments?

There are 5 published records. 5 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX130-5G Attachments?

Based on published records with valid lengths, the range is 711–3,531 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX130-5G Attachments?

The most frequent raw specifications in the current published records are: DN10;2SN-06;17.5Mpa (5 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX130-5G Attachments?

Each record keeps the left and right fitting descriptions separate. Current examples: AT71082: left 美制内螺纹37°内锥; right 90°美制内螺纹37°内锥; AT71082: left 美制内螺纹37°内锥; right 90°美制内螺纹37°内锥; AT78124: left 美制内螺纹37°内锥; right 90°美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX130-5G Attachments hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 10 (AT71082), Pipe No. 12 (AT71082), Pipe No. 14 (AT78124), Pipe No. 9 (AT68901). Open a record to compare its installation position with the linked manual page.