- Length
- 1,050 mm
- Specification
- DN6;1SN-4;20.5MPa
- Left fitting
- American female thread, 37° internal cone seatOriginal Chinese: 美制内螺纹37°内锥
- Right fitting
- American female thread, 37° internal cone seatOriginal Chinese: 美制内螺纹37°内锥
Hydraulic line repair data
Hitachi ZX17U-2 Hose Repair Data
Coverage details
- Hoses
- 1 records
- Full specifications
- 1 records
- Systems
- 1 systems
- Length range
- 1,050–1,050 mm
Current machine
Find a hose on this machine
Use a system name, the number on the diagram, a part number, connection point, length, hose size, or fitting.
Hose repair details
Hose Length and Fitting List
No hose in this list matches those words. Clear the box or search another machine.
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX17U-2
Start with the machine and route
For Hitachi ZX17U-2, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 46623801,050 mm · DN6;1SN-4;20.5MPa · Bucket cylinder
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Based on current published data
Common Repair Questions
Questions appear only when a published record or linked PDF page provides the answer.
What is the hose length range for Hitachi ZX17U-2?
Based on published records with valid lengths, the range is 1,050 mm. Open the individual record to verify its installation position and both end fittings before fabrication.
Which hose specifications are common for Hitachi ZX17U-2?
The most frequent raw specifications in the current published records are: DN6;1SN-4;20.5MPa (1 records). Verify the specification together with length, pressure, and fitting details.
How can I identify the left and right hose fittings for Hitachi ZX17U-2?
Each record keeps the left and right fitting descriptions separate. Current examples: 4662380: left American female thread, 37° internal cone seat; right American female thread, 37° internal cone seat. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.
Can I locate a Hitachi ZX17U-2 hose by diagram pipe number?
Yes. Current examples with a diagram pipe number are: Pipe No. 29 (4662380). Open a record to compare its installation position with the linked manual page.