- Length
- 1,700 mm
- Specification
- DN10;2SN-6;34.5MPa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 美制内螺纹37°内锥
Hydraulic line repair data
Hitachi ZX180W Attachments – Quick Coupler Hose List
Coverage details
- Hoses
- 5 records
- Full specifications
- 5 records
- Systems
- 1 systems
- Length range
- 1,250–2,200 mm
Current system
Find a hose in this system
Use the number on the diagram, a part number, connection point, length, hose size, or fitting.
Hose repair details
Hose Length and Fitting List
- Length
- 1,250 mm
- Specification
- DN19;4SP-12;34.5MPa
- Left fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Right fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Length
- 2,200 mm
- Specification
- DN10;2SN-6;34.5MPa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 45°美制内螺纹37°内锥
- Length
- 1,300 mm
- Specification
- DN19;4SP-12;34.5Mpa
- Left fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Right fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Length
- 1,650 mm
- Specification
- DN19;4SP-12;34.5Mpa
- Left fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Right fitting
- 45°美制内螺纹平面密封
No hose in this list matches those words. Clear the box or search another machine.
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX180W Attachments – Quick Coupler
Start with the machine and route
For Hitachi ZX180W Attachments – Quick Coupler, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 44627071,700 mm · DN10;2SN-6;34.5MPa · 大臂(快换)~小臂(快换)
- 44665841,250 mm · DN19;4SP-12;34.5MPa · 大臂(快换)~小臂(快换)
- 44804542,200 mm · DN10;2SN-6;34.5MPa · 大臂(快换)~小臂(快换)
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Based on current published data
Common Repair Questions
Questions appear only when a published record or linked PDF page provides the answer.
How many hoses are currently listed for Hitachi ZX180W Attachments – Quick Coupler?
What is the hose length range for Hitachi ZX180W Attachments – Quick Coupler?
Which hose specifications are common for Hitachi ZX180W Attachments – Quick Coupler?
How can I identify the left and right hose fittings for Hitachi ZX180W Attachments – Quick Coupler?
Each record keeps the left and right fitting descriptions separate. Current examples: 4462707: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4466584: left American female thread, flat-face seal; right American female thread, flat-face seal; 4480454: left 美制内螺纹37°内锥; right 45°美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.
Can I locate a Hitachi ZX180W Attachments – Quick Coupler hose by diagram pipe number?
Yes. Current examples with a diagram pipe number are: Pipe No. 2 (4462707), Pipe No. 20 (4466584), Pipe No. 2 (4480454), Pipe No. 20 (4307345). Open a record to compare its installation position with the linked manual page.