Hydraulic line repair data

Hitachi ZX180W Hydraulic Pump Hose List

Coverage details

Hoses: 2 records
Full specifications: 2 records
Systems: 1 systems
Length range: 810–810 mm

Current system

Find a hose in this system

Use the number on the diagram, a part number, connection point, length, hose size, or fitting.

Pipe number, part number, route, length, or fittingSearch another machine

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 11A

4489612

Installation route: 液压泵~电磁阀(隔板)

Length: 810 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 45°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 11

9223921

Installation route: 液压泵~电磁阀(隔板)

Length: 810 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 45°美制内螺纹37°内锥

View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Hitachi ZX180W Hydraulic Pump

Start with the machine and route

For Hitachi ZX180W Hydraulic Pump, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Hitachi ZX180W systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

4489612810 mm · DN10;1SN-6;7Mpa · 液压泵~电磁阀(隔板)
9223921810 mm · DN10;1SN-6;7Mpa · 液压泵~电磁阀(隔板)

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX180W Hydraulic Pump?

There are 2 published records. 2 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX180W Hydraulic Pump?

Based on published records with valid lengths, the range is 810 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX180W Hydraulic Pump?

The most frequent raw specifications in the current published records are: DN10;1SN-6;7Mpa (2 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX180W Hydraulic Pump?

Each record keeps the left and right fitting descriptions separate. Current examples: 4489612: left 美制内螺纹37°内锥; right 45°美制内螺纹37°内锥; 9223921: left 美制内螺纹37°内锥; right 45°美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX180W Hydraulic Pump hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 11A (4489612), Pipe No. 11 (9223921). Open a record to compare its installation position with the linked manual page.