Hydraulic line repair data

Hitachi ZX210-5N Swing Motor Hose List

Coverage details

Hoses: 2 records
Full specifications: 2 records
Systems: 1 systems
Length range: 850–1,150 mm

Current system

Find a hose in this system

Use the number on the diagram, a part number, connection point, length, hose size, or fitting.

Pipe number, part number, route, length, or fittingSearch another machine

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 2

4632493

Installation route: 回转马达~中转接头

Length: 1,150 mm
Specification: DN10;1SN-06;18MPa
Left fitting: 90°美制内螺纹74°内锥
Right fitting: 90°美制内螺纹74°内锥

View full repair specifications

Diagram Pipe No. 0

4453023

Installation route: Swing motor → return steel line (hydraulic tank)Original Chinese: 回转马达~回油铁管(液压油箱)

Length: 850 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Hitachi ZX210-5N Swing Motor

Start with the machine and route

For Hitachi ZX210-5N Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Hitachi ZX210-5N systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

46324931,150 mm · DN10;1SN-06;18MPa · 回转马达~中转接头
4453023850 mm · DN10;1SN-6;7Mpa · Swing motor → return steel line (hydraulic tank)

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX210-5N Swing Motor?

There are 2 published records. 2 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX210-5N Swing Motor?

Based on published records with valid lengths, the range is 850–1,150 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX210-5N Swing Motor?

The most frequent raw specifications in the current published records are: DN10;1SN-06;18MPa (1 records), DN10;1SN-6;7Mpa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX210-5N Swing Motor?

Each record keeps the left and right fitting descriptions separate. Current examples: 4632493: left 90°美制内螺纹74°内锥; right 90°美制内螺纹74°内锥; 4453023: left 美制内螺纹37°内锥; right 90°美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX210-5N Swing Motor hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 2 (4632493), Pipe No. 0 (4453023). Open a record to compare its installation position with the linked manual page.