Hydraulic line repair data

Hitachi ZX230W-5N Hydraulic Pump Hose List

Coverage details

Hoses: 2 records
Full specifications: 2 records
Systems: 1 systems
Length range: 520–700 mm

Current system

Find a hose in this system

Use the number on the diagram, a part number, connection point, length, hose size, or fitting.

Pipe number, part number, route, length, or fittingSearch another machine

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 12

4442642

Installation route: 液压泵~吸油铁管

Length: 700 mm
Specification: DN19;2SN-12;21.5MPa
Left fitting: 45°美制内螺纹平面密封
Right fitting: 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 14

4489601

Installation route: 液压泵~电磁阀(液压泵)

Length: 520 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Hitachi ZX230W-5N Hydraulic Pump

Start with the machine and route

For Hitachi ZX230W-5N Hydraulic Pump, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Hitachi ZX230W-5N systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

4442642700 mm · DN19;2SN-12;21.5MPa · 液压泵~吸油铁管
4489601520 mm · DN10;1SN-6;7Mpa · 液压泵~电磁阀(液压泵)

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX230W-5N Hydraulic Pump?

There are 2 published records. 2 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX230W-5N Hydraulic Pump?

Based on published records with valid lengths, the range is 520–700 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX230W-5N Hydraulic Pump?

The most frequent raw specifications in the current published records are: DN10;1SN-6;7Mpa (1 records), DN19;2SN-12;21.5MPa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX230W-5N Hydraulic Pump?

Each record keeps the left and right fitting descriptions separate. Current examples: 4442642: left 45°美制内螺纹平面密封; right 90° elbow, American female thread, flat-face seal; 4489601: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX230W-5N Hydraulic Pump hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 12 (4442642), Pipe No. 14 (4489601). Open a record to compare its installation position with the linked manual page.