Length: 450 mm
Specification: DN25;1SN-16;8.8MPa
Left fitting: 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
Right fitting: 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX270LC Control Valve?

There are 4 published records. 4 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX270LC Control Valve?

Based on published records with valid lengths, the range is 450–1,350 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX270LC Control Valve?

The most frequent raw specifications in the current published records are: DN6;1SN-04;22.5MPa (3 records), DN10;1SN-06;18MPa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX270LC Control Valve?

Each record keeps the left and right fitting descriptions separate. Current examples: 4444735: left 美制内螺纹74°内锥; right 90°美制内螺纹74°内锥; 4437944: left 美制内螺纹74°内锥; right 90°美制内螺纹74°内锥; 4427351: left 90°美制内螺纹74°内锥; right 90°美制内螺纹74°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX270LC Control Valve hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 25 (4444735), Pipe No. 6 (4437944), Pipe No. 10 (4427351), Pipe No. 1 (4437943). Open a record to compare its installation position with the linked manual page.