- Length
- 410 mm
- Specification
- DN19;4SH-12;42MPa
- Left fitting
- 堵头美制内螺纹平面密封
- Right fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
Hydraulic line repair data
Hitachi ZXS370F-3 Hydraulic Pump Hose List
Coverage details
- Hoses
- 3 records
- Full specifications
- 3 records
- Systems
- 1 systems
- Length range
- 410–1,820 mm
Current system
Find a hose in this system
Use the number on the diagram, a part number, connection point, length, hose size, or fitting.
Hose repair details
Hose Length and Fitting List
- Length
- 1,820 mm
- Specification
- DN25;4SH-16;34.5Mpa
- Left fitting
- 90° heavy-series flangeOriginal Chinese: 90°法兰-重型
- Right fitting
- 90° heavy-series flangeOriginal Chinese: 90°法兰-重型
- Length
- 1,420 mm
- Specification
- DN25;4SH-16;34.5Mpa
- Left fitting
- 90° heavy-series flangeOriginal Chinese: 90°法兰-重型
- Right fitting
- 45° heavy-series flangeOriginal Chinese: 45°法兰-重型
No hose in this list matches those words. Clear the box or search another machine.
Workshop guide
Finding the correct hydraulic hose for Hitachi ZXS370F-3 Hydraulic Pump
Start with the machine and route
For Hitachi ZXS370F-3 Hydraulic Pump, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 4368943410 mm · DN19;4SH-12;42MPa · 液压泵~堵头(减震管)
- 46765581,820 mm · DN25;4SH-16;34.5Mpa · 液压泵~分配阀(进油)
- 46765601,420 mm · DN25;4SH-16;34.5Mpa · 液压泵~分配阀(进油)
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Based on current published data
Common Repair Questions
Questions appear only when a published record or linked PDF page provides the answer.
How many hoses are currently listed for Hitachi ZXS370F-3 Hydraulic Pump?
What is the hose length range for Hitachi ZXS370F-3 Hydraulic Pump?
Which hose specifications are common for Hitachi ZXS370F-3 Hydraulic Pump?
How can I identify the left and right hose fittings for Hitachi ZXS370F-3 Hydraulic Pump?
Each record keeps the left and right fitting descriptions separate. Current examples: 4368943: left 堵头美制内螺纹平面密封; right 90° elbow, American female thread, flat-face seal; 4676558: left 90° heavy-series flange; right 90° heavy-series flange; 4676560: left 90° heavy-series flange; right 45° heavy-series flange. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.
Can I locate a Hitachi ZXS370F-3 Hydraulic Pump hose by diagram pipe number?
Yes. Current examples with a diagram pipe number are: Pipe No. 1 (4368943), Pipe No. 7 (4676558), Pipe No. 8 (4676560). Open a record to compare its installation position with the linked manual page.