Hydraulic line repair data

SANY 285-9 Hose Length & Fitting Data

Coverage details
Hoses
1 records
Full specifications
1 records
Systems
1 systems
Length range
600–600 mm

Current machine

Find a hose on this machine

Use a system name, the number on the diagram, a part number, connection point, length, hose size, or fitting.

Search another machine

Hose repair details

Hose Length and Fitting List

Digitized data and source sheets

SANY 285-9 Hose Data and Original Handwritten Sheets

The table is a searchable transcription of the SANY 285-9 workshop notes. The complete original handwritten sheets are shown below without cropping.

Digitized measurements from these sheets

Workshop measurements
Part numberRecorded length
A832305000500 mm
A8321120000400 mm
A8323050001500 mm
A8323065000650 mm
A83123065000650 mm
A832713060000600 mm
B230030006711,950 mm
B230030008951,850 mm
B23003000980850 mm
B230030009881,600 mm
B230030027002,900 mm
B230030035471,700 mm
B23003004133300 mm
B230030048061,000 mm
B230030055091,450 mm
B230080013591,000 mm
B23010300456200 mm
B2300300304661,950 mm
B230030032616350 mm
B230030034236I250 mm
B230103000980850 mm
B2301030009821,000 mm
B2301030009851,600 mm
B2301030021182,550 mm
B230103004282650 mm
B2300300122116I820 mm
B2301030020456I300 mm
B2301030030466I950 mm

Original handwritten sheets

Complete pages are shown in their original proportions without cropping.

SANY 285-9 hydraulic hose part numbers and recorded lengths — technician notebook page 1 of 5 — recorded hose parts A832713060000, B23003002700
Notebook page 1 of 5Recorded on this sheet: A832713060000 — 600 mm; B23003002700 — 2,900 mm.
SANY 285-9 hydraulic hose part numbers and recorded lengths — technician notebook page 4 of 5 — recorded hose parts A832305000, A8323050001, B23003000895
Notebook page 4 of 5Recorded on this sheet: A832305000 — 500 mm; A8323050001 — 500 mm; B23003000895 — 1,850 mm; B230030030466 — 1,950 mm; and 8 more recorded hoses.
SANY 285-9 hydraulic hose part numbers and recorded lengths — technician notebook page 3 of 5 — recorded hose parts A8321120000, A8323065000, B23003000671
Notebook page 3 of 5Recorded on this sheet: A8321120000 — 400 mm; A8323065000 — 650 mm; B23003000671 — 1,950 mm; B23003000988 — 1,600 mm; and 4 more recorded hoses.
SANY 285-9 hydraulic hose part numbers and recorded lengths — technician notebook page 2 of 5 — recorded hose parts B2300300122116I
Notebook page 2 of 5Recorded on this sheet: B2300300122116I — 820 mm.
SANY 285-9 hydraulic hose part numbers and recorded lengths — technician notebook page 5 of 5 — recorded hose parts A83123065000, B23003000980, B23008001359
Notebook page 5 of 5Recorded on this sheet: A83123065000 — 650 mm; B23003000980 — 850 mm; B23008001359 — 1,000 mm; B230103000980 — 850 mm; and 1 more recorded hose.

Workshop guide

Finding the correct hydraulic hose for SANY 285-9

Start with the machine and route

For SANY 285-9, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

What is the hose length range for SANY 285-9?

Based on published records with valid lengths, the range is 600 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for SANY 285-9?

The most frequent raw specifications in the current published records are: 19I (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for SANY 285-9?

Each record keeps the left and right fitting descriptions separate. Current examples: A832713060000: left M30×2 H型 0°（手写接头规格）; right M30×2 H型 90°（手写接头规格）. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "SANY 285-9 Hose Length & Fitting Data". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/machines/sany/285-9--3238352d39/

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
Scroll to Top