Hydraulic line repair data

SANY 365CCI2KHO Hose Length & Fitting Data

Coverage details
Hoses
1 records
Full specifications
1 records
Systems
1 systems
Length range
600–600 mm

Current machine

Find a hose on this machine

Use a system name, the number on the diagram, a part number, connection point, length, hose size, or fitting.

Search another machine

Hose repair details

Hose Length and Fitting List

Digitized data and source sheets

SANY 365CCI2KHO Hose Data and Original Handwritten Sheets

The table is a searchable transcription of the SANY 365CCI2KHO workshop notes. The complete original handwritten sheets are shown below without cropping.

Digitized measurements from these sheets

Workshop measurements
Part numberRecorded length
A8313035000350 mm
A832303500001350 mm
A832713060000600 mm
A833305000081500 mm
B2300300081600 mm
B2300300082450 mm
B23003005034,300 mm
B230030000141,600 mm
B230030006391,000 mm
B23003000811600 mm
B23003000815500 mm
B23003000855900 mm
B23003001216850 mm
B23003001239750 mm
B230030015633,300 mm
B23003002216550 mm
B230030023731,800 mm
B23003002376800 mm
B23003004291800 mm
B230030043091,800 mm
B230030043853,200 mm
B23003004654900 mm
B230030055141,850 mm
B230030074792,850 mm
B2300300237582,500 mm
B2301030025331,200 mm
B2301030026583,200 mm
B2300300059210II600 mm
B2301030007686I320 mm
B2301030608726I1,500 mm
B230030002351911,300 mm
B230103000076811,300 mm
B25010300335825IVF4762,500 mm

Original handwritten sheets

Complete pages are shown in their original proportions without cropping.

SANY 365CCI2KHO hydraulic hose part numbers and recorded lengths — technician notebook page 1 of 5 — recorded hose parts A832713060000, B23003000235191, B23003000639
Notebook page 1 of 5Recorded on this sheet: A832713060000 — 600 mm; B23003000235191 — 1,300 mm; B23003000639 — 1,000 mm; B23003001239 — 750 mm; and 1 more recorded hose.
SANY 365CCI2KHO hydraulic hose part numbers and recorded lengths — technician notebook page 2 of 5 — recorded hose parts B2300300081, B23003000815, B23003001563
Notebook page 2 of 5Recorded on this sheet: B2300300081 — 600 mm; B23003000815 — 500 mm; B23003001563 — 3,300 mm; B23003007479 — 2,850 mm; and 2 more recorded hoses.
SANY 365CCI2KHO hydraulic hose part numbers and recorded lengths — technician notebook page 5 of 5 — recorded hose parts B2300300082, B23003002373, B230030023758
Notebook page 5 of 5Recorded on this sheet: B2300300082 — 450 mm; B23003002373 — 1,800 mm; B230030023758 — 2,500 mm.
SANY 365CCI2KHO hydraulic hose part numbers and recorded lengths — technician notebook page 3 of 5 — recorded hose parts B2300300059210II, B23003001216, B23003004291
Notebook page 3 of 5Recorded on this sheet: B2300300059210II — 600 mm; B23003001216 — 850 mm; B23003004291 — 800 mm; B23003004309 — 1,800 mm; and 4 more recorded hoses.
SANY 365CCI2KHO hydraulic hose part numbers and recorded lengths — technician notebook page 4 of 5 — recorded hose parts A8313035000, A832303500001, A833305000081
Notebook page 4 of 5Recorded on this sheet: A8313035000 — 350 mm; A832303500001 — 350 mm; A833305000081 — 500 mm; B23003000014 — 1,600 mm; and 7 more recorded hoses.

Workshop guide

Finding the correct hydraulic hose for SANY 365CCI2KHO

Start with the machine and route

For SANY 365CCI2KHO, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

What is the hose length range for SANY 365CCI2KHO?

Based on published records with valid lengths, the range is 600 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for SANY 365CCI2KHO?

The most frequent raw specifications in the current published records are: 19I (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for SANY 365CCI2KHO?

Each record keeps the left and right fitting descriptions separate. Current examples: A832713060000: left M30×2 H型 0°（手写接头规格）; right M30×2 H型 90°（手写接头规格）. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "SANY 365CCI2KHO Hose Length & Fitting Data". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/machines/sany/365cci2kho--333635434349324b484f/

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
Scroll to Top