Hydraulic line repair data

SANY SY215-8C Hose Length & Fitting Data

Coverage details
Hoses
1 records
Full specifications
1 records
Systems
1 systems
Length range
750–750 mm

Current machine

Find a hose on this machine

Use a system name, the number on the diagram, a part number, connection point, length, hose size, or fitting.

Search another machine

Hose repair details

Hose Length and Fitting List

Digitized data and source sheets

SANY SY215-8C Hose Data and Original Handwritten Sheets

The table is a searchable transcription of the SANY SY215-8C workshop notes. The complete original handwritten sheets are shown below without cropping.

Digitized measurements from these sheets

Workshop measurements
Part numberRecorded length
230030046419IVN36X20680 mm
A832303500350 mm
A83211200001,200 mm
B23D030014561,200 mm
B230B3001668580 mm
B23003002112,850 mm
B230030025612,700 mm
B2300300270200 mm
B23003000480850 mm
B23003000817700 mm
B230030009821,000 mm
B230030009831,100 mm
B230030014561,200 mm
B230030015633,300 mm
B23003001898260 mm
B230030021152,800 mm
B230030021172,950 mm
B230030022031,400 mm
B230030022753,050 mm
B23003002316500 mm
B230030023171,400 mm
B230030023181,620 mm
B23003002555200 mm
B23003002603900 mm
B230030030151,150 mm
B230030051391,600 mm
B230030053971,300 mm
B230030059811,600 mm
B23010300224820 mm
B230030061413150 mm
B230103000994600 mm
B230103001246I550 mm
B2301030013591,000 mm
B2301030021132,750 mm
B2301030021142,850 mm
B2301030021182,550 mm
B230103003704550 mm
B230103062294680 mm

Original handwritten sheets

Complete pages are shown in their original proportions without cropping.

SANY SY215-8C hydraulic hose part numbers and recorded lengths — technician notebook page 2 of 4 — recorded hose parts 230030046419IVN36X20, B2300300270, B230030061413
Notebook page 2 of 4Recorded on this sheet: 230030046419IVN36X20 — 680 mm; B2300300270 — 200 mm; B230030061413 — 150 mm; B230B3001668 — 580 mm.
SANY SY215-8C hydraulic hose part numbers and recorded lengths — technician notebook page 4 of 4 — recorded hose parts A832303500, B23003000480, B23003001456
Notebook page 4 of 4Recorded on this sheet: A832303500 — 350 mm; B23003000480 — 850 mm; B23003001456 — 1,200 mm; B23003001898 — 260 mm; and 4 more recorded hoses.
SANY SY215-8C hydraulic hose part numbers and recorded lengths — technician notebook page 1 of 4 — recorded hose parts B23003002316, B23003002317, B23003002318
Notebook page 1 of 4Recorded on this sheet: B23003002316 — 500 mm; B23003002317 — 1,400 mm; B23003002318 — 1,620 mm; B23003002603 — 900 mm; and 4 more recorded hoses.
SANY SY215-8C hydraulic hose part numbers and recorded lengths — technician notebook page 3 of 4 — recorded hose parts A8321120000, B23003000817, B23003000982
Notebook page 3 of 4Recorded on this sheet: A8321120000 — 1,200 mm; B23003000817 — 700 mm; B23003000982 — 1,000 mm; B23003000983 — 1,100 mm; and 14 more recorded hoses.

Workshop guide

Finding the correct hydraulic hose for SANY SY215-8C

Start with the machine and route

For SANY SY215-8C, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

What is the hose length range for SANY SY215-8C?

Based on published records with valid lengths, the range is 750 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for SANY SY215-8C?

The most frequent raw specifications in the current published records are: 19I (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for SANY SY215-8C?

Each record keeps the left and right fitting descriptions separate. Current examples: B230103001239: left M30×2 H型 0°（手写接头规格）; right M30×2 H型 90°（手写接头规格）. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "SANY SY215-8C Hose Length & Fitting Data". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/machines/sany/sy215-8c--53593231352d3843/

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
Scroll to Top