Make this hoseSA9453-04209
Finished length450 mm
Hose specification13II
Quantity1
Left fitting1/2 0°FITTING · 0°View real fitting photos ↗
Right fitting1/2 90°FITTING · 0°View real fitting photos ↗
Route先导滤芯—蓄能器
Individual hose record
SA9453-04209 Hose Repair Specifications
Excavator · Volvo · EC210B LC · 先导系统
Finished length450 mm
Hose repair card
Everything needed to identify and make this hose
Volvo EC210B LCPart SA9453-04209
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- SA9453-04209
- Installation route
- 先导滤芯—蓄能器
- Hose specification
- 13II
- Finished length
- 450 mm
- Left fitting
- 1/2 0°
- Right fitting
- 1/2 90°
- Quantity
- 1
Same system
Related Hoses
- Length
- 400 mm
- Specification
- 13II
- Left fitting
- 1/2 0°
- Right fitting
- 1/2 90°
Workshop guide
Finding the correct hydraulic hose for Volvo EC210B LC 先导系统
Start with the machine and route
For Volvo EC210B LC 先导系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- SA9453-04209450 mm · 13II · 先导滤芯—蓄能器
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.