Make this hose7Y-4199
Finished length1,800 mm
Hose specification10I
Quantity1
Left fitting11/16 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting11/16 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route中心油道—电磁阀
Individual hose record
7Y-4199 Hose Repair Specifications
Excavator · Caterpillar · 336D · 中心油道与电磁阀系统
Finished length1,800 mm
Hose repair card
Everything needed to identify and make this hose
Caterpillar 336DPart 7Y-4199
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 7Y-4199
- Installation route
- 中心油道—电磁阀
- Hose specification
- 10I
- Finished length
- 1,800 mm
- Left fitting
- 11/16 0°（手写接头规格）
- Right fitting
- 11/16 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Caterpillar 336D 中心油道与电磁阀系统
Start with the machine and route
For Caterpillar 336D 中心油道与电磁阀系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 7Y-41991,800 mm · 10I · 中心油道—电磁阀
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.