Make this hose31Q6-16250
Finished length1,050 mm
Hose specification19IV
Quantity1
Left fitting13/16 0°FITTING · 0°View real fitting photos ↗
Right fittingF44 90° H110FITTING · 0°View real fitting photos ↗
Route回转马达—分配阀外边
Individual hose record
31Q6-16250 Hose Repair Specifications
Excavator · Hyundai · R215-9 · 回转系统
Finished length1,050 mm
Hose repair card
Everything needed to identify and make this hose
Hyundai R215-9Part 31Q6-16250
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 31Q6-16250
- Installation route
- 回转马达—分配阀外边
- Hose specification
- 19IV
- Finished length
- 1,050 mm
- Left fitting
- 13/16 0°
- Right fitting
- F44 90° H110
- Quantity
- 1
Same system
Related Hoses
- Length
- 920 mm
- Specification
- 19IV
- Left fitting
- 13/16 0°
- Right fitting
- F44 90° H90
Workshop guide
Finding the correct hydraulic hose for Hyundai R215-9 回转系统
Start with the machine and route
For Hyundai R215-9 回转系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 31Q6-162501,050 mm · 19IV · 回转马达—分配阀外边
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.