- Length
- 1,130 mm
- Specification
- DN6;1SN-04;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Individual hose record
FF528673 Hose Repair Specifications
Excavator · Hitachi · ZX310F-FE-6N · Solenoid Valve
Finished length2,050 mm
Locate this hose
Installation diagram — Pipe No. 24
Locate Pipe No. 24 in the diagram, then confirm part number FF528673 before removing the hose.
Repair specifications
- Part number
- FF528673
- Diagram pipe number
- 24
- Installation route
- 电磁阀~电磁阀(液压泵)
- Hose specification
- DN10;1SN-6;7Mpa
- Finished length
- 2,050 mm
- Working pressure
- 7 MPa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Quantity
- 1
Same system
Related Hoses
- Length
- 2,170 mm
- Specification
- DN10;1SN-6;7Mpa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 2,500 mm
- Specification
- DN10;1SN-6;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 美制内螺纹37°内锥
- Length
- 680 mm
- Specification
- DN6;1SN-04;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 1,050 mm
- Specification
- DN6;1SN-04;7Mpa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 560 mm
- Specification
- DN6;1SN-04;22.5MPa
- Left fitting
- 美制内螺纹74°内锥
- Right fitting
- 90°美制内螺纹74°内锥
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX310F-FE-6N Solenoid Valve
Start with the machine and route
For Hitachi ZX310F-FE-6N Solenoid Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- FF5286732,050 mm · DN10;1SN-6;7Mpa · 电磁阀~电磁阀(液压泵)
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.