Individual hose record
4203124 Hose Repair Specifications
Excavator · Hitachi · EX160WD · Supply and Return Valve
Repair specifications
- Part number
- 4203124
- Diagram pipe number
- 9
- Installation route
- 进回油阀~过渡阀块(分配阀)
- Hose specification
- DN12;1层纤维-8;10.5MPa
- Finished length
- 1,400 mm
- Working pressure
- 10.5 MPa
- Left fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Right fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Hitachi EX160WD Supply and Return Valve
Start with the machine and route
For Hitachi EX160WD Supply and Return Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 42031241,400 mm · DN12;1层纤维-8;10.5MPa · 进回油阀~过渡阀块(分配阀)
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.