Individual hose record
DS2013337 Hose Repair Specifications
Excavator · Doosan · DH370LC-7 · Hydraulic Tank
Repair specifications
- Part number
- DS2013337
- Installation route
- 中心油道~油箱
- Hose specification
- 19I（手写管线代码）
- Finished length
- 1,900 mm
- Left fitting
- 13/16″ A型 0°（手写接头规格）
- Right fitting
- 13/16″ A型 90°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Doosan DH370LC-7 Hydraulic Tank
Start with the machine and route
For Doosan DH370LC-7 Hydraulic Tank, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- DS20133371,900 mm · 19I（手写管线代码） · 中心油道~油箱
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.