Make this hose227-6021
Finished length2,200 mm
Hose specification25IV
Quantity4
Left fittingF47.6 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fittingF47.6 90°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route行走马达—中心油道
Individual hose record
227-6021 Hose Repair Specifications
Excavator · Caterpillar · 324D · 行走系统
Finished length2,200 mm
Hose repair card
Everything needed to identify and make this hose
Caterpillar 324DPart 227-6021
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 227-6021
- Installation route
- 行走马达—中心油道
- Hose specification
- 25IV
- Finished length
- 2,200 mm
- Left fitting
- F47.6 0°（手写接头规格）
- Right fitting
- F47.6 90°（手写接头规格）
- Quantity
- 4
Workshop guide
Finding the correct hydraulic hose for Caterpillar 324D 行走系统
Start with the machine and route
For Caterpillar 324D 行走系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 227-60212,200 mm · 25IV · 行走马达—中心油道
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.