- Length
- 2,600 mm
- Specification
- DN12;1SN-8;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 美制内螺纹37°内锥
Individual hose record
4365790 Hose Repair Specifications
Excavator · Hitachi · EX200-5 · Solenoid Valve
Finished length2,400 mm
Locate this hose
Installation diagram — Pipe No. 89
Locate Pipe No. 89 in the diagram, then confirm part number 4365790 before removing the hose.
Repair specifications
- Part number
- 4365790
- Diagram pipe number
- 89
- Installation route
- 电磁阀~接线板(电磁阀)
- Hose specification
- DN10;1SN-06;18MPa
- Finished length
- 2,400 mm
- Working pressure
- 18 MPa
- Left fitting
- 美制内螺纹74°内锥
- Right fitting
- 90°美制内螺纹74°内锥
- Quantity
- 1
Same system
Related Hoses
Workshop guide
Finding the correct hydraulic hose for Hitachi EX200-5 Solenoid Valve
Start with the machine and route
For Hitachi EX200-5 Solenoid Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 43657902,400 mm · DN10;1SN-06;18MPa · 电磁阀~接线板(电磁阀)
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.