Individual hose record
Excavator · Case · CX370C · Boom Assembly
Hose repair card
Case CX370CPipe No. 9 · Part KSV16680
Left fittingAmerican female thread, flat-face sealFITTING · 0°View real fitting photos ↗
Right fitting45°法兰-轻型SAE FLANGE · 45°View real fitting photos ↗
Route铲斗油缸左
Tap the card to enlarge it without leaving this page.
Same system
Workshop guide
For Case CX370C Boom Assembly, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.
