- Length
- 1,200 mm
- Specification
- DN25;4SH-16;34.5Mpa
- Left fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
- Right fitting
- 90° light-series flangeOriginal Chinese: 90°法兰-轻型
Individual hose record
9260390 Hose Repair Specifications
Excavator · Hitachi · ZX370F-LL-6N · Swivel Joint
Finished length1,200 mm
Repair specifications
- Part number
- 9260390
- Diagram pipe number
- 7
- Installation route
- 回转接头~分配阀右下
- Hose specification
- DN25;4SP-16;34.5MPa
- Finished length
- 1,200 mm
- Working pressure
- 34.5 MPa
- Left fitting
- 90° elbow, American female thread, flat-face sealOriginal Chinese: 90°美制内螺纹平面密封
- Right fitting
- 90° light-series flangeOriginal Chinese: 90°法兰-轻型
- Quantity
- 1
Same system
Related Hoses
- Length
- 1,300 mm
- Specification
- DN25;4SP-16;34.5MPa
- Left fitting
- 45°美制内螺纹平面密封
- Right fitting
- 90° light-series flangeOriginal Chinese: 90°法兰-轻型
- Length
- 1,300 mm
- Specification
- DN25;4SH-16;34.5Mpa
- Left fitting
- 45°美制内螺纹平面密封
- Right fitting
- 90° light-series flangeOriginal Chinese: 90°法兰-轻型
- Length
- 1,300 mm
- Specification
- DN25;4SH-16;34.5Mpa
- Left fitting
- 45°美制内螺纹平面密封
- Right fitting
- 90° light-series flangeOriginal Chinese: 90°法兰-轻型
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX370F-LL-6N Swivel Joint
Start with the machine and route
For Hitachi ZX370F-LL-6N Swivel Joint, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 92603901,200 mm · DN25;4SP-16;34.5MPa · 回转接头~分配阀右下
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.