Make this hoseB230103002446
Finished length1,050 mm
Hose specification19I
Quantity1
Left fittingM30×2 H型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fittingM30×2 H型 90°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route液压泵左内—油箱
Individual hose record
B230103002446 Hose Repair Specifications
Excavator · SANY · SY335C9-I2K · 液压泵系统
Finished length1,050 mm
Hose repair card
Everything needed to identify and make this hose
SANY SY335C9-I2KPart B230103002446
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- B230103002446
- Installation route
- 液压泵左内—油箱
- Hose specification
- 19I
- Finished length
- 1,050 mm
- Left fitting
- M30×2 H型 0°（手写接头规格）
- Right fitting
- M30×2 H型 90°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for SANY SY335C9-I2K 液压泵系统
Start with the machine and route
For SANY SY335C9-I2K 液压泵系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- B2301030024461,050 mm · 19I · 液压泵左内—油箱
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.