Make this hose31Q7-11161
Finished length1,190 mm
Hose specification25IV（手写管线代码）
Quantity1
Left fittingF47.6 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fittingF44 90°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route液压泵~分配阀（泵里边）
Individual hose record
31Q7-11161 Hose Repair Specifications
Excavator · Hyundai · R275LC-9T · Hydraulic Pump
Finished length1,190 mm
Hose repair card
Everything needed to identify and make this hose
Hyundai R275LC-9TPart 31Q7-11161
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 31Q7-11161
- Installation route
- 液压泵~分配阀（泵里边）
- Hose specification
- 25IV（手写管线代码）
- Finished length
- 1,190 mm
- Left fitting
- F47.6 0°（手写接头规格）
- Right fitting
- F44 90°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Hyundai R275LC-9T Hydraulic Pump
Start with the machine and route
For Hyundai R275LC-9T Hydraulic Pump, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 31Q7-111611,190 mm · 25IV（手写管线代码） · 液压泵~分配阀（泵里边）
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.