Make this hose4286812
Finished length800 mm
Hose specification25IV（手写管线代码）
Quantity2
Left fitting1 7/16″ A型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting1 7/16″ A型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route减震管
Individual hose record
4286812 Hose Repair Specifications
Excavator · Hitachi · ZX450H · Hydraulic Pump
Finished length800 mm
Hose repair card
Everything needed to identify and make this hose
Hitachi ZX450HPart 4286812
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 4286812
- Installation route
- 减震管
- Hose specification
- 25IV（手写管线代码）
- Finished length
- 800 mm
- Left fitting
- 1 7/16″ A型 0°（手写接头规格）
- Right fitting
- 1 7/16″ A型 0°（手写接头规格）
- Quantity
- 2
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX450H Hydraulic Pump
Start with the machine and route
For Hitachi ZX450H Hydraulic Pump, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 4286812800 mm · 25IV（手写管线代码） · 减震管
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.