Make this hose31Q6-13390
Finished length800 mm
Hose specification19IV（手写管线代码）
Quantity4
Left fittingF38I 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fittingF38I 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route大臂
Individual hose record
31Q6-13390 Hose Repair Specifications
Excavator · Hyundai · R220LC-9S · Boom Assembly
Finished length800 mm
Hose repair card
Everything needed to identify and make this hose
Hyundai R220LC-9SPart 31Q6-13390
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 31Q6-13390
- Installation route
- 大臂
- Hose specification
- 19IV（手写管线代码）
- Finished length
- 800 mm
- Left fitting
- F38I 0°（手写接头规格）
- Right fitting
- F38I 0°（手写接头规格）
- Quantity
- 4
Workshop guide
Finding the correct hydraulic hose for Hyundai R220LC-9S Boom Assembly
Start with the machine and route
For Hyundai R220LC-9S Boom Assembly, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 31Q6-13390800 mm · 19IV（手写管线代码） · 大臂
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.