- Length
- 850 mm
- Specification
- DN6;1SN-04;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Individual hose record
4249348 Hose Repair Specifications
Excavator · Hitachi · ZX210LC-6N · Control Valve
Finished length1,150 mm
Locate this hose
Installation diagram — Pipe No. 9
Locate Pipe No. 9 in the diagram, then confirm part number 4249348 before removing the hose.
Repair specifications
- Part number
- 4249348
- Diagram pipe number
- 9
- Installation route
- 分配阀左~电磁阀
- Hose specification
- DN6;1SN-04;7Mpa
- Finished length
- 1,150 mm
- Working pressure
- 7 MPa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Quantity
- 1
Same system
Related Hoses
- Length
- 1,150 mm
- Specification
- DN6;1SN-04;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 600 mm
- Specification
- DN6;1SN-04;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 45°美制内螺纹37°内锥
- Length
- 450 mm
- Specification
- DN6;1SN-4;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 400 mm
- Specification
- DN6;1SN-4;7Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 美制内螺纹37°内锥
- Length
- 250 mm
- Specification
- DN6;1SN-4;7Mpa
- Left fitting
- 45°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 950 mm
- Specification
- DN16;4SP-10;34.5Mpa
- Left fitting
- 45°法兰-轻型
- Right fitting
- 45°法兰-轻型
- Length
- 950 mm
- Specification
- DN16;4SP-10;34.5Mpa
- Left fitting
- 45°法兰-轻型
- Right fitting
- 45°法兰-轻型
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX210LC-6N Control Valve
Start with the machine and route
For Hitachi ZX210LC-6N Control Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 42493481,150 mm · DN6;1SN-04;7Mpa · 分配阀左~电磁阀
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.