Individual hose record

DS2092177 Hose Repair Specifications

Excavator · Doosan · DX225LCA · 行走系统

Finished length2,700 mm

Repair specifications

Part number
DS2092177
Diagram pipe number
3
Installation route
行走系统 · TRAVEL PIPING - LONG CRAWLER(DX225LCA) · Fig. 2180 · 管号 3
Hose specification
DN6;1SN-04;22.5MPa
Finished length
2,700 mm
Working pressure
22.5 MPa
Left fitting
British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥
Right fitting
45° elbow, British female thread, 60° external cone seatOriginal Chinese: 45°英制内螺纹60°外锥

Same system

Related Hoses

Diagram Pipe No. 2

DS2092087

Installation route: 行走系统 · TRAVEL PIPING - STD(DX220A) · Fig. 2185 · 管号 2

Length
2,590 mm
Specification
DN6;1SN-04;22.5MPa
Left fitting
British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥
Right fitting
45° elbow, British female thread, 60° external cone seatOriginal Chinese: 45°英制内螺纹60°外锥
View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Doosan DX225LCA 行走系统

Start with the machine and route

For Doosan DX225LCA 行走系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Doosan DX225LCA systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • DS20921772,700 mm · DN6;1SN-04;22.5MPa · 行走系统 · TRAVEL PIPING - LONG CRAWLER(DX225LCA) · Fig. 2180 · 管号 3

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top