Make this hoseKHJ11570
Finished length1,300 mm
Hose specification10I
Quantity1
Left fitting3/8 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting3/8 90°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route中转接头—分配阀前边
Individual hose record
KHJ11570 Hose Repair Specifications
Excavator · Sumitomo · 240-5A · 中转接头与主控阀系统
Finished length1,300 mm
Hose repair card
Everything needed to identify and make this hose
Sumitomo 240-5APart KHJ11570
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- KHJ11570
- Installation route
- 中转接头—分配阀前边
- Hose specification
- 10I
- Finished length
- 1,300 mm
- Left fitting
- 3/8 0°（手写接头规格）
- Right fitting
- 3/8 90°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Sumitomo 240-5A 中转接头与主控阀系统
Start with the machine and route
For Sumitomo 240-5A 中转接头与主控阀系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- KHJ115701,300 mm · 10I · 中转接头—分配阀前边
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.