- Length
- 711 mm
- Specification
- DN10;2SN-06;17.5Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Individual hose record
AT71082 Hose Repair Specifications
Excavator · Hitachi · ZX160LC-5G · Attachments
Finished length711 mm
Repair specifications
- Part number
- AT71082
- Diagram pipe number
- 11
- Installation route
- 电磁阀~液压压力阀
- Hose specification
- DN10;2SN-06;17.5Mpa
- Finished length
- 711 mm
- Working pressure
- 17.5 MPa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Quantity
- 1
Same system
Related Hoses
- Length
- 965 mm
- Specification
- DN10;2SN-06;17.5Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 3,531 mm
- Specification
- DN10;2SN-06;17.5Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 3,531 mm
- Specification
- DN10;2SN-06;17.5Mpa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX160LC-5G Attachments
Start with the machine and route
For Hitachi ZX160LC-5G Attachments, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- AT71082711 mm · DN10;2SN-06;17.5Mpa · 电磁阀~液压压力阀
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.