- Length
- 7,500 mm
- Specification
- DN6;1SN-04;22.5MPa
- Left fitting
- 公制内螺纹24°锥带O形圈-轻型
- Right fitting
- 90°公制内螺纹24°锥带O形圈-轻型
Individual hose record
730502005214 Hose Repair Specifications
Excavator · Sunward · SWE215F-5 · Attachments – Lock Valve
Finished length7,500 mm
Repair specifications
- Part number
- 730502005214
- Diagram pipe number
- 2
- Installation route
- 小臂油缸锁止阀L~液压油箱X1
- Hose specification
- DN6;1SN-04;22.5MPa
- Finished length
- 7,500 mm
- Working pressure
- 22.5 MPa
- Left fitting
- 公制内螺纹24°锥带O形圈-轻型
- Right fitting
- 90°公制内螺纹24°锥带O形圈-轻型
- Quantity
- 1
Same system
Related Hoses
Workshop guide
Finding the correct hydraulic hose for Sunward SWE215F-5 Attachments – Lock Valve
Start with the machine and route
For Sunward SWE215F-5 Attachments – Lock Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 7305020052147,500 mm · DN6;1SN-04;22.5MPa · 小臂油缸锁止阀L~液压油箱X1
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.