Make this hose3Q6-12430
Finished length450 mm
Hose specification13I
Quantity1
Left fitting1 3/16″ 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting1 3/16″ 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route回转马达放油管
Individual hose record
3Q6-12430 Hose Repair Specifications
Excavator · Hyundai · R225LC-9T · Swing Motor
Finished length450 mm
Hose repair card
Everything needed to identify and make this hose
Hyundai R225LC-9TPart 3Q6-12430
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- 3Q6-12430
- Installation route
- 回转马达放油管
- Hose specification
- 13I
- Finished length
- 450 mm
- Left fitting
- 1 3/16″ 0°（手写接头规格）
- Right fitting
- 1 3/16″ 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Hyundai R225LC-9T Swing Motor
Start with the machine and route
For Hyundai R225LC-9T Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 3Q6-12430450 mm · 13I · 回转马达放油管
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.