Individual hose record

4366762 Hose Repair Specifications

Excavator · Hitachi · EX450LC-5 · Swing Motor

Finished length1,150 mm

Hose repair card

Everything needed to identify and make this hose

Hitachi EX450LC-5Pipe No. 92 · Part 4366762

Make this hose4366762
L = 1,150 mmDN10;1SN-6;7MpaL0°R90°
Finished length1,150 mm
Working pressure7 MPa
Hose specificationDN10;1SN-6;7Mpa
Quantity1
L0°

Left fitting美制内螺纹37°内锥JIC 37° · 0°View real fitting photos ↗

R90°

Right fitting90°美制内螺纹37°内锥JIC 37° · 90°View real fitting photos ↗

Route回转马达(左)~电磁阀

Tap the card to enlarge it without leaving this page.

4366762 hose repair card

Repair specifications

Part number
4366762
Diagram pipe number
92
Installation route
回转马达(左)~电磁阀
Hose specification
DN10;1SN-6;7Mpa
Finished length
1,150 mm
Working pressure
7 MPa
Left fitting
美制内螺纹37°内锥
Right fitting
90°美制内螺纹37°内锥
Quantity
1

Same system

Related Hoses

Diagram Pipe No. 44

4366753

Installation route: 回转马达(左)~回转马达(右)

Length
700 mm
Specification
DN10;1SN-6;7Mpa
Left fitting
美制内螺纹37°内锥
Right fitting
90°美制内螺纹37°内锥
View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Hitachi EX450LC-5 Swing Motor

Start with the machine and route

For Hitachi EX450LC-5 Swing Motor, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Hitachi EX450LC-5 systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • 43667621,150 mm · DN10;1SN-6;7Mpa · 回转马达(左)~电磁阀

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "4366762 Hose Repair Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_beaddea0ba55c04006a56aeb/
HoseSeek currently shows: part number: 4366762; diagram pipe number: 92; installation route: 回转马达(左)~电磁阀; hose specification: DN10;1SN-6;7Mpa; finished length in millimetres: 1150; left fitting: 美制内螺纹37°内锥; right fitting: 90°美制内螺纹37°内锥.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top