Make this hoseCPJ0734
Finished length900 mm
Hose specification13II
Quantity1
Left fitting1/2 D型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Right fitting1/2 D型 0°（手写接头规格）FITTING · 0°View real fitting photos ↗
Route中心油道—回转马达（回油）
Individual hose record
CPJ0734 Hose Repair Specifications
Excavator · Sumitomo · 210-5 · 中心油道与回转系统
Finished length900 mm
Hose repair card
Everything needed to identify and make this hose
Sumitomo 210-5Part CPJ0734
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- CPJ0734
- Installation route
- 中心油道—回转马达（回油）
- Hose specification
- 13II
- Finished length
- 900 mm
- Left fitting
- 1/2 D型 0°（手写接头规格）
- Right fitting
- 1/2 D型 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Sumitomo 210-5 中心油道与回转系统
Start with the machine and route
For Sumitomo 210-5 中心油道与回转系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- CPJ0734900 mm · 13II · 中心油道—回转马达（回油）
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.