Individual hose record
DS2053735 Hose Repair Specifications
Excavator · Doosan · DX345LC · 黄油系统
Repair specifications
- Part number
- DS2053735
- Installation route
- 黄油管（中间）
- Hose specification
- 6I
- Finished length
- 3,500 mm
- Left fitting
- 1/4 D型 0°（手写接头规格）
- Right fitting
- 1/4 D型 0°（手写接头规格）
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Doosan DX345LC 黄油系统
Start with the machine and route
For Doosan DX345LC 黄油系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- DS20537353,500 mm · 6I · 黄油管（中间）
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.