- Length
- 1,500 mm
- Specification
- DN10;1层纤维-6;14MPa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Individual hose record
4285787 Hose Repair Specifications
Excavator · Hitachi · EX100-2 · Solenoid Valve
Finished length1,500 mm
Repair specifications
- Part number
- 4285787
- Diagram pipe number
- 18
- Installation route
- 电磁阀~进回油阀
- Hose specification
- DN10;1层纤维-6;14MPa
- Finished length
- 1,500 mm
- Working pressure
- 14 MPa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Quantity
- 1
Same system
Related Hoses
- Length
- 1,050 mm
- Specification
- DN10;1层纤维-6;14MPa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Length
- 1,050 mm
- Specification
- DN10;1层纤维-6;14MPa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Workshop guide
Finding the correct hydraulic hose for Hitachi EX100-2 Solenoid Valve
Start with the machine and route
For Hitachi EX100-2 Solenoid Valve, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 42857871,500 mm · DN10;1层纤维-6;14MPa · 电磁阀~进回油阀
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.