- Length
- 1,397 mm
- Specification
- Parker hose component 75631
- Left fitting
- 96406
- Right fitting
- 96406
Hose assembly specifications
1259068GT Hydraulic Hose Specifications
Aerial Work Platform · Genie · GS-4047
Hose-only length1,397 mm
Hose assembly details
- Part number
- 1259068GT
- Hose type
- Parker hose component 75631
- Hose-only length
- 1,397 mm
- Left fitting code
- 96406
- Right fitting code
- 96406
- Application
- Hydraulic Hoses and Fittings — HOSE,ASSY,MAN TO FILTER RYCO
- Manual page
- 111
Same machine
More hoses for this machine
- Length
- 1,066.8 mm
- Specification
- Parker hose component 75631
- Left fitting
- 96406
- Right fitting
- 96407
- Length
- 1,066.8 mm
- Specification
- Parker hose component 75631
- Left fitting
- 96406
- Right fitting
- 96407
- Length
- 457.2 mm
- Specification
- Parker hose component 75631
- Left fitting
- 96406
- Right fitting
- 105045
- Length
- 1,524 mm
- Specification
- Parker hose component 56776
- Left fitting
- 39890
- Right fitting
- 39890
- Length
- 1,625.6 mm
- Specification
- Parker hose component 56776
- Left fitting
- 39890
- Right fitting
- 39890
- Length
- 1,651 mm
- Specification
- Parker hose component 78852
- Left fitting
- 78855
- Right fitting
- 78855
- Length
- 1,066.8 mm
- Specification
- Parker hose component 56776
- Left fitting
- 39890
- Right fitting
- 39890
Workshop guide
Finding the correct hydraulic hose for Genie GS-4047
Start with the machine and route
For Genie GS-4047, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 1259068GT1,397 mm · Parker hose component 75631 · Hydraulic Hoses and Fittings — HOSE,ASSY,MAN TO FILTER RYCO
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Optional cross-check
Ask an AI search tool to check this repair data
The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.
See the exact question being sent
I am checking hydraulic hose repair information for "1259068GT Hydraulic Hose Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_cc1d0032c06efa12263fa176/ HoseSeek currently shows: part number: 1259068GT; hose specification: Parker hose component 75631; finished length in millimetres: 1397; left fitting: 96406; right fitting: 96406. Verify, where applicable: 1. Exact machine model and any serial-number range. 2. Hydraulic system and installation route. 3. Hose part number and diagram pipe number. 4. Finished length, hose specification, and pressure rating. 5. Both end fittings, including thread, sealing seat, size, and angle. 6. Installation-diagram position and routing. State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.
For reference only. Confirm the actual hose before fabrication.