Individual hose record
KHJ14900 Hose Repair Specifications
Excavator · Sumitomo · SH210LC-5 · 回转马达先导回路
Repair specifications
- Part number
- KHJ14900
- Installation route
- 电磁阀—回转马达
- Hose specification
- 10I
- Finished length
- 2,600 mm
- Left fitting
- 3/8 0°
- Right fitting
- 3/8 90°
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Sumitomo SH210LC-5 回转马达先导回路
Start with the machine and route
For Sumitomo SH210LC-5 回转马达先导回路, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- KHJ149002,600 mm · 10I · 电磁阀—回转马达
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.