- Length
- 600 mm
- Specification
- DN12;1SN-8;7MPa
- Left fitting
- 美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
Individual hose record
4718481 Hose Repair Specifications
Excavator · Hitachi · ZX245USLC-6N · Hydraulic Pump
Finished length900 mm
Repair specifications
- Part number
- 4718481
- Diagram pipe number
- 7
- Installation route
- 液压泵左~液压泵右
- Hose specification
- DN10;1SN-6;7Mpa
- Finished length
- 900 mm
- Working pressure
- 7 MPa
- Left fitting
- 90°美制内螺纹37°内锥
- Right fitting
- 90°美制内螺纹37°内锥
- Quantity
- 1
Same system
Related Hoses
- Length
- 650 mm
- Specification
- DN19;4SP-12;34.5Mpa
- Left fitting
- American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
- Right fitting
- 45°美制内螺纹平面密封
Workshop guide
Finding the correct hydraulic hose for Hitachi ZX245USLC-6N Hydraulic Pump
Start with the machine and route
For Hitachi ZX245USLC-6N Hydraulic Pump, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 4718481900 mm · DN10;1SN-6;7Mpa · 液压泵左~液压泵右
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.