Individual hose record

P930-082013 Hydraulic Hose Replacement Specifications

Excavator · Hyundai · R225LC-9T · Hydraulic System

Finished length650 mm

Hose repair card

Everything needed to identify and make this hose

Hyundai R225LC-9TPart P930-082013

LocateInstallation diagram
Hyundai R225LC-9T installation diagram for hydraulic hose P930-082013
Make this hoseP930-082013
L = 650 mm13IL0°R90°
Finished length650 mm
Hose specification13I
Quantity1
L0°

Left fitting13/16英寸 直通FITTING · 0°View real fitting photos ↗

R90°

Right fitting13/16英寸 90°弯头FITTING · 90°View real fitting photos ↗

Route先导泵—电磁阀

Tap the card to enlarge it without leaving this page.

P930-082013 hose repair card

Repair specifications

Part number
P930-082013
Installation route
先导泵—电磁阀
Hose specification
13I
Finished length
650 mm
Left fitting
13/16英寸 直通
Right fitting
13/16英寸 90°弯头
Quantity
1

Same system

Related Hoses

Workshop guide

Finding the correct hydraulic hose for Hyundai R225LC-9T Hydraulic System

Start with the machine and route

For Hyundai R225LC-9T Hydraulic System, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Hyundai R225LC-9T systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Optional cross-check

Ask an AI search tool to check this repair data

The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.

ChatGPT Perplexity Claude Google AI Mode
See the exact question being sent
I am checking hydraulic hose repair information for "P930-082013 Hydraulic Hose Replacement Specifications". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/hoses/hose_e6f07dea84a3f32d332a664c/
HoseSeek currently shows: part number: P930-082013; installation route: 先导泵—电磁阀; hose specification: 13I; finished length in millimetres: 650; left fitting: 13/16英寸 直通; right fitting: 13/16英寸 90°弯头.

Verify, where applicable:
1. Exact machine model and any serial-number range.
2. Hydraulic system and installation route.
3. Hose part number and diagram pipe number.
4. Finished length, hose specification, and pressure rating.
5. Both end fittings, including thread, sealing seat, size, and angle.
6. Installation-diagram position and routing.

State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.

For reference only. Confirm the actual hose before fabrication.

Scroll to Top