- Length
- 740 mm
- Specification
- DN12;3SN-08;41.5MPa
- Left fitting
- 45°公制内螺纹24°锥带O形圈-重型
- Right fitting
- 90°公制内螺纹24°锥带O形圈-重型
Individual hose record
730504008582 Hose Repair Specifications
Excavator · Sunward · SWE90UF-A3 · Swivel Joint
Finished length670 mm
Repair specifications
- Part number
- 730504008582
- Diagram pipe number
- 5
- Installation route
- 回转接头F~分配阀A8
- Hose specification
- DN12;3SN-08;41.5MPa
- Finished length
- 670 mm
- Working pressure
- 41.5 MPa
- Left fitting
- 45°公制内螺纹24°锥带O形圈-重型
- Right fitting
- 90°公制内螺纹24°锥带O形圈-重型
- Quantity
- 1
Same system
Related Hoses
Workshop guide
Finding the correct hydraulic hose for Sunward SWE90UF-A3 Swivel Joint
Start with the machine and route
For Sunward SWE90UF-A3 Swivel Joint, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 730504008582670 mm · DN12;3SN-08;41.5MPa · 回转接头F~分配阀A8
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.