Make this hoseX400-062063
Finished length3,150 mm
Hose specification10I
Quantity1
Left fitting11/16 0°FITTING · 0°View real fitting photos ↗
Right fitting11/16 0°FITTING · 0°View real fitting photos ↗
RoutePT阀—电磁阀
Individual hose record
X400-062063 Hose Repair Specifications
Excavator · Hyundai · R215-9 · 先导控制系统
Finished length3,150 mm
Hose repair card
Everything needed to identify and make this hose
Hyundai R215-9Part X400-062063
Tap the card to enlarge it without leaving this page.
Repair specifications
- Part number
- X400-062063
- Installation route
- PT阀—电磁阀
- Hose specification
- 10I
- Finished length
- 3,150 mm
- Left fitting
- 11/16 0°
- Right fitting
- 11/16 0°
- Quantity
- 1
Workshop guide
Finding the correct hydraulic hose for Hyundai R215-9 先导控制系统
Start with the machine and route
For Hyundai R215-9 先导控制系统, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- X400-0620633,150 mm · 10I · PT阀—电磁阀
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.