Hydraulic line repair data

Caterpillar CAT®215C Hydraulic Tank Hose List

Coverage details
Hoses
2 records
Full specifications
2 records
Systems
1 systems
Length range
970–1,360 mm

Current system

Find a hose in this system

Use the number on the diagram, a part number, connection point, length, hose size, or fitting.

Search another machine

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 43

6W-3025

Installation route: 液压油箱~

Length
970 mm
Specification
DN32;1SN-20;4.3Mpa
Left fitting
90° light-series flangeOriginal Chinese: 90°法兰-轻型
Right fitting
Light-series flangeOriginal Chinese: 法兰-轻型
View full repair specifications

Diagram Pipe No. 23

8V-8692

Installation route: 液压油箱~液压油散热器

Length
1,360 mm
Specification
DN19;1SN-12;8.7Mpa
Left fitting
90°美制内螺纹37°锥
Right fitting
美制内螺纹37°锥
View full repair specifications

Workshop guide

Finding the correct hydraulic hose for Caterpillar CAT®215C Hydraulic Tank

Start with the machine and route

For Caterpillar CAT®215C Hydraulic Tank, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.

See all Caterpillar CAT®215C systems

Read the dimensions before cutting

Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.

Records to compare

  • 6W-3025970 mm · DN32;1SN-20;4.3Mpa · 液压油箱~
  • 8V-86921,360 mm · DN19;1SN-12;8.7Mpa · 液压油箱~液压油散热器

Use the drawing as a location check

Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Caterpillar CAT®215C Hydraulic Tank?

There are 2 published records. 2 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Caterpillar CAT®215C Hydraulic Tank?

Based on published records with valid lengths, the range is 970–1,360 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Caterpillar CAT®215C Hydraulic Tank?

The most frequent raw specifications in the current published records are: DN19;1SN-12;8.7Mpa (1 records), DN32;1SN-20;4.3Mpa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Caterpillar CAT®215C Hydraulic Tank?

Each record keeps the left and right fitting descriptions separate. Current examples: 6W-3025: left 90° light-series flange; right Light-series flange; 8V-8692: left 90°美制内螺纹37°锥; right 美制内螺纹37°锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Caterpillar CAT®215C Hydraulic Tank hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 43 (6W-3025), Pipe No. 23 (8V-8692). Open a record to compare its installation position with the linked manual page.

Scroll to Top