- Length
- 970 mm
- Specification
- DN32;1SN-20;4.3Mpa
- Left fitting
- 90° light-series flangeOriginal Chinese: 90°法兰-轻型
- Right fitting
- Light-series flangeOriginal Chinese: 法兰-轻型
Individual hose record
8V-8692 Hose Repair Specifications
Excavator · Caterpillar · CAT®215C · Hydraulic Tank
Finished length1,360 mm
Repair specifications
- Part number
- 8V-8692
- Diagram pipe number
- 23
- Installation route
- 液压油箱~液压油散热器
- Hose specification
- DN19;1SN-12;8.7Mpa
- Finished length
- 1,360 mm
- Working pressure
- 8.7 MPa
- Left fitting
- 90°美制内螺纹37°锥
- Right fitting
- 美制内螺纹37°锥
- Quantity
- 2
Same system
Related Hoses
Workshop guide
Finding the correct hydraulic hose for Caterpillar CAT®215C Hydraulic Tank
Start with the machine and route
For Caterpillar CAT®215C Hydraulic Tank, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- 8V-86921,360 mm · DN19;1SN-12;8.7Mpa · 液压油箱~液压油散热器
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
For reference only. Confirm the actual hose before fabrication.