- Length
- 400 mm
- Specification
- 6I
- Left fitting
- M14×1.5 H型 0°（手写接头规格）
- Right fitting
- M14×1.5 H型 0°（手写接头规格）
Hydraulic line repair data
SANY 230C Hose Length & Fitting Data
Coverage details
- Hoses
- 1 records
- Full specifications
- 1 records
- Systems
- 1 systems
- Length range
- 400–400 mm
Current machine
Find a hose on this machine
Use a system name, the number on the diagram, a part number, connection point, length, hose size, or fitting.
Hose repair details
Hose Length and Fitting List
No hose in this list matches those words. Clear the box or search another machine.
Digitized data and source sheets
SANY 230C Hose Data and Original Handwritten Sheets
The table is a searchable transcription of the SANY 230C workshop notes. The complete original handwritten sheets are shown below without cropping.
Digitized measurements from these sheets
| Part number | Recorded length |
|---|---|
| A8321200006I | 1,200 mm |
| A8323065000 | 650 mm |
| A83123050000 | 500 mm |
| A831213035000 | 350 mm |
| B2300300224 | 820 mm |
| B2300300304 | 550 mm |
| B2300300598 | 1,600 mm |
| B2300300898 | 260 mm |
| B23003000284 | 200 mm |
| B23003000822 | 400 mm |
| B23003000871 | 1,400 mm |
| B23003001168 | 580 mm |
| B23003001456 | 1,200 mm |
| B23003001563 | 3,300 mm |
| B23003001947 | 550 mm |
| B23003002113 | 2,150 mm |
| B23003002114 | 2,850 mm |
| B23003002263 | 1,400 mm |
| B23003002316 | 1,400 mm |
| B23003002473 | 2,550 mm |
| B23003002657 | 280 mm |
| B23003002688 | 1,450 mm |
| B23003002712 | 450 mm |
| B23003003016 | 2,300 mm |
| B23003005397 | 1,300 mm |
| B23003006443 | 750 mm |
| B23010300164 | 680 mm |
| B230030021146I | 2,850 mm |
| B230103002115 | 2,800 mm |
| B230103002116 | 3,400 mm |
| B230103002117 | 2,950 mm |
| B230103002275 | 3,050 mm |
| B230103002603 | 900 mm |
| B230103002689 | 1,350 mm |
| B230103005139 | 1,600 mm |
| B23010300081861 | 700 mm |
| LTB23003002318 | 1,420 mm |
Original handwritten sheets
Complete pages are shown in their original proportions without cropping.
Workshop guide
Finding the correct hydraulic hose for SANY 230C
Start with the machine and route
For SANY 230C, identify the exact model and hydraulic system on the machine first. A part number or diagram pipe number is the fastest way to narrow a replacement hose; if neither is visible, compare the installation route and the existing hose.
Read the dimensions before cutting
Check whether a listed dimension is finished assembly length, hose-only length, or cut length. These are not interchangeable. Confirm hose specification and pressure rating, then compare both ends separately: thread, sealing seat, size, angle, and orientation.
Records to compare
- B230103000822400 mm · 6I · 液压泵里内调节器—液压泵外内调节器
Use the drawing as a location check
Where an installation drawing or manual figure is available, match its callout to the part number and physical route. A hydraulic circuit diagram explains connections but does not show the exact routing of a hose on the machine. Take the old hose or clear end-fitting photographs to the workshop if any dimension is missing.
Based on current published data
Common Repair Questions
Questions appear only when a published record or linked PDF page provides the answer.
What is the hose length range for SANY 230C?
Based on published records with valid lengths, the range is 400 mm. Open the individual record to verify its installation position and both end fittings before fabrication.
Which hose specifications are common for SANY 230C?
The most frequent raw specifications in the current published records are: 6I (1 records). Verify the specification together with length, pressure, and fitting details.
How can I identify the left and right hose fittings for SANY 230C?
Each record keeps the left and right fitting descriptions separate. Current examples: B230103000822: left M14×1.5 H型 0°（手写接头规格）; right M14×1.5 H型 0°（手写接头规格）. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.
Optional cross-check
Ask an AI search tool to check this repair data
The question is already written for this machine or hose. Use a tool with web search enabled; treat its answer as a starting point and verify on the machine.
See the exact question being sent
I am checking hydraulic hose repair information for "SANY 230C Hose Length & Fitting Data". Use web search and cite a source for every factual point. Compare this HoseSeek page with manufacturer manuals and reliable parts documentation: https://www.hoseseek.com/machines/sany/230c--32333043/ Verify, where applicable: 1. Exact machine model and any serial-number range. 2. Hydraulic system and installation route. 3. Hose part number and diagram pipe number. 4. Finished length, hose specification, and pressure rating. 5. Both end fittings, including thread, sealing seat, size, and angle. 6. Installation-diagram position and routing. State explicitly what you could not verify. Do not infer a missing dimension or fitting. End with a short on-machine checklist for a hose repair technician.